Great video i love knowledge, maybe this will help a coffee maker the filter chamber isn't sealed, what about using a espresso machine, I'm not sure but I think it has a pressurized chamber. You might consider using something like that.
You have quite an elaborate way of saying almost absolutely nothing. This is just barely scratching the surface of any kind of explanation of what you are actually doing. I realize this was five years ago, but you could totally can this video and update it. You might add that these crystals are actually quite a week part of the spectrum as far as cannabis goes. You have processed it so far down that it has very little value. Since you've got the whole process right there in front of you, it would be awesome if you would show a final product to, in detail. We would like to see what you have spend so much time talking about
Pretty vague. Not helpful. Much easier to just use ethanol to remove the CBD/THC from the buds and then distil the liquid and filter it before evaporating (and recovering) the alcohol.
Could you use an espresso machine? Very small scale fill the basket with the sand or make a column shaped basket. Then put the product on top of the sand and switch on they create 15-21bar of pressure so don't see why it wouldn't work 🤷🏻♂️ worth a try.
I can not work out what "liquid" you used in the filtration system, was it ethonal. Iv looked through the comments and you have soaked up all the compliments but havent answered any questions so if anyone knows what liquid he used that would be appreciated
Fill water tank of cheap coffee machine with sand, disconnect the heating circuit of the water pre-filter, would the pump then create pressure, evaporate off as usual etc? Great videos man.
What if you place sand in the filter of the coffee machine, place gas tube and seal the coffee machine so the pressure can be kept within as much as possible. If the coffee can be assigned for CBD making than you can drill hole for the gas tube to minimize the gas escaping and create the pressure needed. Just was thinking, I am applied chemistry student and I am very interested in the topic of CBD extractions.
could you make the process automated , using pumps to recirculate the product x number of times need valves and switches but should be able to be done with relay logic no cpu needed just asking i have no clue on viscisity etc
Let me say this, thank God for cannabidiol because it is my medicine as without it my world is too stressful, I feel centered when I use it, 1 dose keeps me going for a week.
What does he keep talking about a coffee machine get a buchner funnle
Does it working With thc?
Audio bad
Funny you should ask, I know a guy who knows how to do it.
What particle size sand?
Thank for the great video… what size micron sand do u use?
wish yall would show the process with real product
Great video i love knowledge, maybe this will help a coffee maker the filter chamber isn't sealed, what about using a espresso machine, I'm not sure but I think it has a pressurized chamber. You might consider using something like that.
Use a high pressure espresso machine take the heat exchange it into pressure and use that the blow it through the sand
Very cool. Is there a specific size of sand granules? specific type of sand ?
You have quite an elaborate way of saying almost absolutely nothing. This is just barely scratching the surface of any kind of explanation of what you are actually doing. I realize this was five years ago, but you could totally can this video and update it. You might add that these crystals are actually quite a week part of the spectrum as far as cannabis goes. You have processed it so far down that it has very little value. Since you've got the whole process right there in front of you, it would be awesome if you would show a final product to, in detail. We would like to see what you have spend so much time talking about
Pretty vague. Not helpful. Much easier to just use ethanol to remove the CBD/THC from the buds and then distil the liquid and filter it before evaporating (and recovering) the alcohol.
What gradation of sand is utilized in this process ?
I did it with Weedborn CBD products!
How do you filter out sand?
Has he figured out how to create the crystals at home yet ?
love the fucking shirt dog
I never saw any one like you who give so much ans of comments I think you are great learner and curious person
Could you use an espresso machine? Very small scale fill the basket with the sand or make a column shaped basket. Then put the product on top of the sand and switch on they create 15-21bar of pressure so don't see why it wouldn't work 🤷🏻♂️ worth a try.
Dude perfect 💯😎
What is the extract?
So interesting. thank you.
I have a question on how to make cherry oil. When I was a kid we used to get it all the time but now it's hard to find.
I can not work out what "liquid" you used in the filtration system, was it ethonal. Iv looked through the comments and you have soaked up all the compliments but havent answered any questions so if anyone knows what liquid he used that would be appreciated
Must it be Sahara desert 🏜️ type of sand?
Thanks cheers
It's good to see Weedborn have new CBD products that will save me money and energy to heal myself.
Hahaha did you ever find a way to use a coffee machine lmao man I was dying
Fill water tank of cheap coffee machine with sand, disconnect the heating circuit of the water pre-filter, would the pump then create pressure, evaporate off as usual etc? Great videos man.
Awesome character, would be fun eating some psychedelics with him.
What if you place sand in the filter of the coffee machine, place gas tube and seal the coffee machine so the pressure can be kept within as much as possible. If the coffee can be assigned for CBD making than you can drill hole for the gas tube to minimize the gas escaping and create the pressure needed. Just was thinking, I am applied chemistry student and I am very interested in the topic of CBD extractions.
Can you please make a detail video step by step on how to make crystal 99 percent cbd
could you make the process automated , using pumps to recirculate the product x number of times need valves and switches but should be able to be done with relay logic no cpu needed just asking i have no clue on viscisity etc
What is that milky white material in the tube, can anyone please help.
Hi, what is the liquid solvent used?
thanks
Could you use Activated Carbon instead of sand?
It might decrees the number of times it will need to be filtered.
I have a idea that I believe may work for the coffee pot idea.
3:39 : ..a sinking feeling is setting in..
Where can I buy the machine
Hii.. is that true CBD help to cure cancer??
Let me say this, thank God for cannabidiol because it is my medicine as without it my world is too stressful, I feel centered when I use it, 1 dose keeps me going for a week.
CBD is the Diet Pepsi of weed. The choice of middle age Karen’s. Cbd is useless without thc. 🤷♂️ change my mind.
What is the mixture you use for eluent? Are you doing gradients 50/50 or single solvent? Also have you thought about dry column vacuum chromatography?
Now i can concentrate the CBD and smoke the THC remains
You look pretty relaxed!
how do you clean your silica between cycles?
What are you using UNDER the silica to stop it from betting pushed into the valve at the bottom?
We need kilos!!!!!!
What happens to the other Cannabinoids?? Their are over a 100 cannabinoids? SO I am curious how do you know that Pure CBD is left crystalized? Thanks
How pure is this oil?